Xatellite PWR-L QuickStartGuide

Packing Items

Figure : Xatellite PWR-L Package

📝 NOTE

The number of antennas depends on what you order. Refer to the store for more information.

Connect the Hardware

a. Install the antennas

Figure : Install the antennas

⚠️ WARNING

The WiFi antenna and 4G/5G antenna look similar. Please make sure the WiFi spot is connected with the antenna with negative connector and 5G spot with the positive connector.

Figure : Antennas Notice

b. Insert the SIM card into the SIM-TRAY

Figure : Card Notice

c. Connect the power adapter

Figure : Connect power

d. Connect the M12 ethernet

Figure : Connect ethernet

Verify the Hardware Connection

Figure : Xatellite PWR-L Top

1

SIM SLOT A

2

SIM SLOT B

3

SIM-A LED

4

SIM-B LED

5

5G Hz WiFi LED

6

2.4G Hz WiFi

7

System LED

8

LAN4-4 LED

9

LAN4-3 LED

10

LAN4-2 LED

11

LAN4-1 LED

12

ETH3 LED

13

ETH2 LED

14

ETH1 LED

15

ETH0 LED

16

Micro SD Card

17

Reset Button

Figure : Xatellite PWR-L side

18

Power Connector

19

WiFi Antenna

20

5G / 4G Antenna

Figure : Xatellite PWR-L back

21

LAN 4-4

22

LAN 4-3

23

LAN 4-2

24

LAN 4-1

25

ETH 3

26

ETH 2

27

ETH 1

28

ETH 0

Enjoy the Internet

• Wired
Connect your computers to the router's LAN ports via Ethernet cables.

• Wireless
Find the SSIDs (network names) and wireless pass-word printed on the label at the bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.

Figure : Xatellite PWR-L label

Customize the Xatellite PWR-L

1. Make sure your computer is connected to the router (wired or wireless).
   

2. Launch a web browser and type in https://192.168.1.1.
   

• Username : admin
• Password : eSix6688

Figure : Web Login Page

Xatellite PWR-L setting card slot

Under the "Cellular > Status" page, this page support card slot selection. The Wwan0 interface corresponds to tray-A group card slot; the Wwan1 interface corresponds to tray-B group card slot.

Figure : Xatellite PWR-L setting card slot

APN

Under the "Cellular > Configuration" page, this page support setting APN

Figure : APN

Successful dial

Under the "Cellular > Status" page, When cellular successfully dials up and obtains an IP address, it means that cpe can accessed the Internet normally.

Figure : Successful dial

### Change Wi-Fi password

Under the "Network > Wireless" page,this page can setting about Wi-Fi Configuration.

Click“Edit”,you can change the Wi-Fi SSID and password

Figure : Change Wi-Fi password

Change ssid:

Figure : Change ssid

Change password:

Figure : Change password

Safety Instructions

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other charger s than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.