Xatellite MAX QuickStartGuide

Packing Items

Figure : Xatellite MAX Package

📝 NOTE

The number of antennas depends on what you order. Refer to the store for more information.

Connect the Hardware

a. Install the antennas

Figure : Install the antennas

⚠️ WARNING

The WiFi antenna and 4G/5G antenna look similar. Please make sure the WiFi spot is connected with the antenna with negative connector and 5G spot with the positive connector.

Figure : Antennas Notice

b. Insert the SIM card into the SIM-TRAY

Figure : Card Notice

c. Connect the power adapter

Figure : Connect power

Verify the Hardware Connection

Figure : Xatellite MAX front

1

USB 3.0

2

USB 2.0

3

Console

4

ETH0

5

ETH1

6

ETH2

7

ETH3

8

ETH4-1

9

ETH4-2

10

ETH4-3

11

ETH4-4

12

DC Input

13

DC connector

Figure : Xatellite MAX back

14

SIM Tray A

15

SIM Tray B

16

SIM-A LED

17

SIM-B LED

18

5G Hz WiFi LED

19

2.4G Hz WiFi LED

20

System LED

21

ETH4-4 LED

22

ETH4-3 LED

23

ETH4-2 LED

24

ETH4-1 LED

25

ETH3 LED

26

ETH2 LED

27

ETH1 LED

28

ETH0 LED

29

Micro SD Card

30

Reset Button

31

5G Antenna Connector

32

WiFi Antenna Connector

Enjoy the Internet

• Wired
Connect your computers to the router's LAN ports via Ethernet cables.

• Wireless
Find the SSIDs (network names) and wireless pass-word printed on the label at the bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.

Figure : Xatellite MAX label

Customize the Xatellite MAX

1. Make sure your computer is connected to the router (wired or wireless).
   

2. Launch a web browser and type in https://192.168.1.1.
   

• Username : admin
• Password : eSix6688

Figure : Web Login Page

Xatellite Max setting card slot

Under the "Cellular > Status" page, this page support card slot selection.

Wwan0 interface corresponds to tray-A group card slot;wwan1 interface corresponds to tray-B group card slot.

Figure : Xatellite Max setting card slot

APN

Under the "Cellular > Configuration" page, this page support setting APN

Figure : APN

Successful dial

Under the "Cellular > Status" page, When cellular successfully dials up and obtains an IP address, it means that cpe can accessed the Internet normally.

Figure : Successful dial

Change Wi-Fi password

Under the "Network > Wireless" page,this page can setting about Wi-Fi Configuration.

Click“Edit”,you can change the Wi-Fi SSID and password

Figure : Change Wi-Fi password

Change ssid:

Figure : Change ssid

Change password:

Figure : Change password

Safety Instructions

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other charger s than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.