# Xatellite ST Quick Start Guide

# Packing Items



📝 NOTE

The number of antennas depends on what you order. Refer to the store for more information.

# Connect the Hardware

# a. Install the antennas


⚠️ WARNING

The WiFi antenna and 4G/5G antenna look similar. Please make sure the WiFi spot is connected with the antenna with negative connector and 5G spot with the positive connector.



# b. Insert the SIM card into the slot NanoSIM Card



# c. Connect the power adapter

# Verify the Hardware Connection

1
Reset Button
2
WAN/LAN port
3
LAN port
4
5G WiFi LED
5
System Status
6
DC connector

Tips

1
Press the Reset button for >6 seconds' to restore the system to factor default

📝 NOTE

Check the Following LED's status. When the Power LED is blink, your router is turn on successfully. If the WiFi LED is blink, your computer is connected to the WiFi successfully.

7
4G/5G Antenna Connector
8
Power LED
9
System LED
10
WAN LED
11
LAN LED
12
2.4G Hz LED
13
5.8G Hz LED
14
5G LED
15
Link LED
16
Nano SIM Slot
17
WiFi Antenna Connector
18
WiFi Antenna Connector

# Enjoy the Internet


• Wired
Connect your computers to the router's LAN ports via Ethernet cables.

• Wireless
Find the SSIDs (network names) and wireless pass-word printed on the label at the bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.

# Customize the Xatellite ST

# Login

  1. Make sure your computer is connected to the router (wired or wireless).

  2. Launch a web browser and type in https://192.168.2.1.

  • Username : admin
  • Password : eSix6688

# Xatellite ST setting card slot

Under the "Network > Cellular" page, this page support card slot selection.

Wwan0 interface corresponds to SIM1 card slot;wwan1 interface corresponds to SIM2 card slot.

# APN

Under the "Network > Cellular" page, this page support setting APN

# Successful dial

Under the "Network > Cellular" page, When cellular successfully dials up and obtains an IP address, it means that cpe can accessed the Internet normally.

# Change Wi-Fi password

Under the "Network > Wireless" page,this page can setting about Wi-Fi Configuration.

Click“Edit”,you can change the Wi-Fi SSID and password

Change ssid:

Change password:

# Safety Instructions

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use damaged charger or USB cable to charge the device.
  • Do not use any other charger s than those recommended.
  • Do not use the device where wireless devices are not allowed.
  • Adapter shall be installed near the equipment and shall be easily accessible.