eSIX Documentation Center

# Xatellite PWR QuickStartGuide

# Packing Items



📝 NOTE

The number of antennas depends on what you order. Refer to the store for more information.

# Connect the Hardware

# a. Install the antennas


⚠️ WARNING

The WiFi antenna and 4G/5G antenna look similar. Please make sure the WiFi spot is connected with the antenna with negative connector and 5G spot with the positive connector.

# b. Insert the SIM card into the SIM-TRAY

# c. Connect the power adapter



📝 NOTE ( M12 port and cable install step )


Slip the connector on the cable





Slide the cap, seal and other required housing parts like seals or contact springs onto the cable

# c. Connect the M12 ethernet



📝 NOTE ( M12 ethernet cable install step )


Slide the cap, seal and other required housing parts like seals or contact springs onto the cable




M12 welding color
1
Orange White
2
Orange
3
Green White
4
Green
5
Brown White
6
Brown
7
Blue White
8
Blue

# Verify the Hardware Connection

1
ETH7 (WAN)
2
ETH6 (LAN)
3
ETH5 (LAN)
4
ETH4 (LAN)
5
ETH3 (LAN)
6
ETH2 (LAN)
7
ETH1 (LAN)
8
ETH0 (WAN)
9
Power Connector
10
WiFi Antenna
11
5G / 4G Antenna
12
SIM SLOT A
13
SIM SLOT B
14
SIM-A LED
15
SIM-B LED
16
5G Hz WiFi LED
17
2.4G Hz WiFi
18
System LED
19
LAN7 LED
20
LAN6 LED
21
LAN5 LED
22
LAN4 LED
23
LAN3 LED
24
LAN2 LED
25
LAN1 LED
26
WAN0 LED
27
Micro SD Card
28
Reset Button

# Enjoy the Internet


• Wired
Connect your computers to the router's LAN ports via Ethernet cables.

• Wireless
Find the SSIDs (network names) and wireless pass-word printed on the label at the bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.

# Customize the Xatellite PWR


  1. Make sure your computer is connected to the router (wired or wireless).

  2. Launch a web browser and type in https://192.168.1.1.

  • Username : admin
  • Password : eSix6688

# Insert the SIM card into the SIM-TRAY

Please open the device and insert the SIM card. After installing the SIM card, please refer to the figure and follow the steps to connect.

Xatellite PWR has a total of four card slots, each module corresponds to a set of card slots.

# Xatellite PWR setting card slot

Under the "Network > Cellular" page, this page support card slot selection.

Wwan0 interface corresponds to tray-A group card slot;wwan1 interface corresponds to tray-B group card slot.

# APN

Under the "Network > Cellular" page, this page support setting APN

# Successful dial

Under the "Network > Cellular" page, When cellular successfully dials up and obtains an IP address, it means that cpe can accessed the Internet normally.

# Change Wi-Fi password

Under the "Network > Wireless" page,this page can setting about Wi-Fi Configuration.

Click“Edit”,you can change the Wi-Fi SSID and password

Change ssid:

Change password:

# Safety Instructions

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use damaged charger or USB cable to charge the device.
  • Do not use any other charger s than those recommended.
  • Do not use the device where wireless devices are not allowed.
  • Adapter shall be installed near the equipment and shall be easily accessible.

← DataSheet →