# Xatellite MAX QuickStartGuide
# Packing Items
The number of antennas depends on what you order. Refer to the store for more information.
# Connect the Hardware
# a. Install the antennas
The WiFi antenna and 4G/5G antenna look
similar. Please make sure the WiFi spot is connected with the antenna with negative connector and 5G spot with the positive connector.
# b. Insert the SIM card into the SIM-TRAY
# c. Connect the power adapter
# Verify the Hardware Connection
# Enjoy the Internet
Connect your computers to the router's LAN ports via Ethernet cables.
Find the SSIDs (network names) and wireless pass-word printed on the label at the bottom of the router.
Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.
# Customize the Xatellite MAX
Make sure your computer is connected to the router (wired or wireless).
Launch a web browser and type in https://192.168.1.1.
- Username : admin
- Password : eSix6688
# Insert the SIM card into the SIM-TRAY
Please open the device and insert the SIM card. After installing the SIM card, please refer to the figure and follow the steps to connect.
Xatellite MAX has a total of four card slots, each module corresponds to a set of card slots.
# Xatellite Max setting card slot
Under the "Network > Cellular" page, this page support card slot selection.
Wwan0 interface corresponds to tray-A group card slot;wwan1 interface corresponds to tray-B group card slot.
Under the "Network > Cellular" page, this page support setting APN
# Successful dial
Under the "Network > Cellular" page, When cellular successfully dials up and obtains an IP address, it means that cpe can accessed the Internet normally.
# Change Wi-Fi password
Under the "Network > Wireless" page,this page can setting about Wi-Fi Configuration.
Click“Edit”,you can change the Wi-Fi SSID and password
# Safety Instructions
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other charger s than those recommended.
- Do not use the device where wireless devices are not allowed.
- Adapter shall be installed near the equipment and shall be easily accessible.
← User Manual DataSheet →